The die adopts coat-hanger flow channel and unique design of restrictor-bar without dead corner.
Adjusting different thickness without halting the line.
Quickly lip gap system will Shorten the thickness adjustment time. Longest working time, No dead corner No Scratch, Producing Terperature will be controlled at ±1℃.
Improve the plasticization processing and Assure even thickness.
Advantage:
PVC Fast lip open sheet Die with super Clear, Smooth Surface, Less spherulites. less waterprint, high impact resistance and easy processed.
Get a quote
The use of high-quality special steel, hanger-type flow channel design, unique unrestrained flow rod full flow path no dead angle design, effectively overcome the board surface processing marks, so that the board surface smooth and bright.
Get a quoteWith special flow channels and die lip design, it is suitable for different materials.
Special lip temperature control device.
A continuous, unobstructed flow surface is obtained at the lip, and a fully spaced push adjustment screw fitted with a small gap acts on the metal to bounce up and down. The die lip can be bent to adjust the die gap. Movable lower lip design to suit the different thickness requirements of extruded sheet. The inside and outside of the mold is chrome plated, and the cavity flow path is plated with hard chrome to achieve anti-corrosion and anti-sticking effects. The fasteners are made of 2.9 high-strength bolts and are made of high quality stainless steel heating rods with built-in zone control heating.
Get a quoteIt is stable in production, simple in structure, easy to disassemble and clean.
Product features: safety and environmental protection, waterproof non-slip fire and moisture, mute, super wear, easy construction.
High quality and pressure resistance, light weight, various colors, good flexibility, good thermal conductivity, easy maintenance.
A continuous, unobstructed flow surface is obtained at the lip, and a fully spaced push adjustment screw fitted with a small gap acts on the metal to bounce up and down. The die lip can be bent to adjust the die gap. Movable lower lip design to suit the different thickness requirements of extruded sheet. The inside and outside of the mold is chrome plated, and the cavity flow path is plated with hard chrome to achieve anti-corrosion and anti-sticking effects. The fasteners are made of 2.9 high-strength bolts and are made of high quality stainless steel heating rods with built-in zone control heating.
Get a quoteIt is stable in production, simple in structure, easy to disassemble and clean.
Product features: safety and environmental protection, waterproof non-slip fire and moisture, mute, super wear, easy construction.
High quality and pressure resistance, light weight, various colors, good flexibility, good thermal conductivity, easy maintenance.
Multilayer Manifold Dies
Each layer of flow channel is specially designed for each specific polymer. Comparing with co-extrusion through die and feed block, Mulitlayer manifold die can get more uniform and accurate proportion of each layer of polymer. There are separate temperature control units in each layer of flow channel, with heat insulation device.
Suitable for co-extrusion of different polymers with different melting points, the largest melting temperature difference is 80℃.
Get a quote
Especially apply to the multilayer co-extrusion with technical temperature differing from 20 degree to 80 degree and polymers of extensive difference in shear rate and viscosity.
Get a quoteMulti-flow channel multifold co-extrusion die (double channels, three and five channels)
More artworks can be achieved through multilayer multifold co-extrusion and multilayer feed block.
The applications of typically designed flow channel and multilayer feed block enable to produce multilayer products as well as products of different width, direction and color.
Adjusting screws installed in tiny gap working on resin pressure and mental bounce, able to bend the lip to adjust gap, so that continuous flow can be formed without blocking on lip part.
Get a quoteMobilizable die orifice equipped to make rough adjustment.
45degree blocking rod equipped to make material flow adjustment, stuitable to produce waterproof sheet of 1-8mm.
Apply to PE,PA,PP,PET,ABS,PS and other materials.
Die width: 1000mm-10000mm.
Die Upper lip with all push type adjustment device and die head using coat hanger type flow design, can be used to produce sheet thickness of 01.-2.5mm.
Get a quoteStable production and simple structure makes it easy to dismantle and clean.
Apply to PC,PMMA,HIPS,PP,PE,EVA,CPE and other materials.