The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 1.1M-1.6M, and can also be customized according to customer special requirements.
The diameter of the meltblown head (spinneret) is 0.2mm-0.3mm, and the center distance of the spinneret hole is between 0.7-0.8 mm.
Suitable for process temperature below 35℃, carbon fiber 330-350℃, PP, PET below 300℃.
Suitable for general output of 30-50KG/hour, special requirements below 80KG/hour, and can also be determined according to the production line configuration capacity.
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 1.1M-1.6M, and can also be customized according to customer special requirements.
The diameter of the meltblown head (spinneret) is 0.2mm-0.3mm, and the center distance of the spinneret hole is between 0.7-0.8 mm.
Suitable for process temperature below 35℃, carbon fiber 330-350℃, PP, PET below 300℃.
Suitable for general output of 30-50KG/hour, special requirements below 80KG/hour, and can also be determined according to the production line configuration capacity.
The hanger-type runner is designed based on the analysis of raw material characteristics (viscosity, temperature, rate).
The polishing finish of the mold cavity is O.Olum - 0.06um, and the surface finish of the melt flow surface is 0.03um-0.04um. It adopts internal heating of the heating rod or external heating of the heating plate, and hot oil circulation temperature control.
It is suitable for PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, carbon fiber and other materials.
Get a quoteThe conventional die head model is 1.1M-1.6M, and can also be customized according to customer special requirements.
The diameter of the meltblown head (spinneret) is 0.2mm-0.3mm, and the center distance of the spinneret hole is between 0.7-0.8 mm.
Suitable for process temperature below 35℃, carbon fiber 330-350℃, PP, PET below 300℃.
Suitable for general output of 30-50KG/hour, special requirements below 80KG/hour, and can also be determined according to the production line configuration capacity.